Pelco DVR C682M-E Manual do Utilizador

DX7000 SeriesDigital Video RecorderInstallation/Operation ManualC682M-E (11/01)®Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.comIn N

10 Pelco Manual C682M-E (11/01)DX7000 SYSTEM SETUPTo setup the DX7000 Digital Video Recorder use the left mouse button and click on theSETUP button lo

Pelco Manual C682M-E (11/01) 11COLOR SETUPFigure 7. Color Setup Menu1 CON – Adjusts the CONTRAST of the viewed and recorded scene.2 BRI – Adjusts the

12 Pelco Manual C682M-E (11/01)SCHEDULE SETUPFigure 8. Schedule Setup Menu1 GROUP (01-24) – Selects group to be scheduled.2 Sets START TIME and END TI

Pelco Manual C682M-E (11/01) 13Evaluate the flow of motion at the surveillance site before programming a schedule. A record-ing schedule can consist o

14 Pelco Manual C682M-E (11/01)SPEED SETUPFigure 9. Speed Setup Menu1 RECORDING SPEED MODEa. NORMAL – Sets recording speed for continuous recording.b.

Pelco Manual C682M-E (11/01) 15MOTION DETECTION SETUPFigure 10. Motion Detection Setup Menu1 BEEP – Beeps when motion is detected.2 SENSITIVITY – Adju

16 Pelco Manual C682M-E (11/01)PASSWORD SETUPFigure 11. Password Setup Menu1 SELECT LEVEL – Levels include Administrator, Search User, PTZ/Backup User

Pelco Manual C682M-E (11/01) 17PAN & TILT SETUPFigure 12. Pan and Tilt Protocol Menu1 Select pan and tilt protocol by scrolling through the select

18 Pelco Manual C682M-E (11/01)OPERATIONRECORDING STATUSThe colored circle located to the right of the on-screen camera title indicates the recordings

Pelco Manual C682M-E (11/01) 19PATTERNA pattern is a user-defined, viewable camera path with a definite beginning and end.The pattern can consist of a

2 Pelco Manual C682M-E (11/01)CONTENTSIMPORTANT SAFEGUARDS AND WARNINGS ...5DESCRIPTION...

20 Pelco Manual C682M-E (11/01)PRESET TOURSA preset tour is a programmed sequential execution of preset positions.How to Program a Preset Tour1. Click

Pelco Manual C682M-E (11/01) 21SEARCH CONTROL MODEFigure 15. Search Control Menu1 Date and Time Indicator – Displays current date and time.2 Search Da

22 Pelco Manual C682M-E (11/01)SELECT DATE AND TIME1. Enter the year and month in the SEARCH DATE area of the menu. Click the up ordown arrow buttons

Pelco Manual C682M-E (11/01) 23BACKUP TO 3.5-INCH DISKETTE1. Press the CAMERA SELECTION button.2. Disable all cameras in search mode. FDD backup canno

24 Pelco Manual C682M-E (11/01)REMOTE SITE SOFTWAREDESCRIPTIONFree remote site software is included with the DX7000 to provide remote site viewing of

Pelco Manual C682M-E (11/01) 25REGISTERED SITE SETUPFigure 18. Setup Screen1 Date and Time Indicator – Displays current date and time.2 SITE NAME – E

26 Pelco Manual C682M-E (11/01)OPERATIONFigure 19. Online Mode1 Date and Time Indicator – Displays current date and time.2 SEARCH Button – Plays back

Pelco Manual C682M-E (11/01) 279 Screen Division –Single camera display Displays cameras 1-9Quad display, cameras 1-4 Displays cameras 10-16Quad displ

28 Pelco Manual C682M-E (11/01)VIEWIt is not necessary to use the screen division buttons located in the lower left corner of thescreen to change the

Pelco Manual C682M-E (11/01) 29PATTERNA pattern is a user-defined, viewable camera path with a definite beginning and end.The pattern can consist of a

Pelco Manual C682M-E (11/01) 3LIST OF TABLESAVideo Coaxial Cable Requirements ...7INST

30 Pelco Manual C682M-E (11/01)Figure 21. Pattern and Preset BarsPRESET TOURSA preset tour is a programmed sequential execution of preset positions.H

Pelco Manual C682M-E (11/01) 31SEARCH MODEFigure 22. Search Mode1 Date and Time Indicator – Displays current date and time.2 Search Date – Selects mo

32 Pelco Manual C682M-E (11/01)SELECT DATE AND TIME1. Enter the year and month in the SEARCH DATE area of the menu. Click the up ordown arrow buttons

Pelco Manual C682M-E (11/01) 33EMERGENCY AGENT SOFTWAREFigure 24. Emergency Agent WindowEmergency Agent software alerts the remote site client of any

34 Pelco Manual C682M-E (11/01)BACKUP VIEWER SOFTWAREUse the Backup Viewer software to search images stored on backup media, DAT tape orDVD disc.To in

Pelco Manual C682M-E (11/01) 35BACKUP VIEWER OPERATIONFigure 25. Backup Viewer1 Date and Time Indicator – Displays current date and time.2 Search Dat

36 Pelco Manual C682M-E (11/01)WATERMARK TOOLThe Watermark tool allows you to verify if an original image has been altered. The WatermarkingViewer sof

Pelco Manual C682M-E (11/01) 37Figure 27. The Image Has Been AlteredThere are three indications that an image has been altered:1. A red frame around t

38 Pelco Manual C682M-E (11/01)INSTALLING THE DX7000CD (CD-RW DRIVE)1. Connect one end of the USB data cable to the CD-RW drive. Connect the other end

Pelco Manual C682M-E (11/01) 396. Click Next. The following message appears:7. Select Search for the Best Driver for Your Device. Click Next and the f

4 Pelco Manual C682M-E (11/01)(This page intentionally left blank.)

40 Pelco Manual C682M-E (11/01)8. Select Floppy Disk Drives and click Next. The following appears:9. Accept the recommended driver by clicking Next. T

Pelco Manual C682M-E (11/01) 41LOADING THE DirectCD SOFTWARE1. From the DISPLAY mode of the DX7000 click on the SETUP button. The SETUPmode appears.2.

42 Pelco Manual C682M-E (11/01)PREPARING CD-RW MEDIA FOR BACKUPNOTE: The initial format of a CD-RW disk can take a considerable amount of time,approxi

Pelco Manual C682M-E (11/01) 438. Select the CD-RW drive and click Next. The following appears:9. Type the title of the CD-RW in the place provided, a

44 Pelco Manual C682M-E (11/01)BACKUP WINDOWFigure 29. Backup (COPY) Window1 SELECT DRIVE box – Lists drives with files available for backup.2 STORED

Pelco Manual C682M-E (11/01) 45HOW TO BACKUP (COPY) TO THE CD-RW DRIVE1. From the DISPLAY mode of the DX7000, click the COPY button. The SETUP modeapp

46 Pelco Manual C682M-E (11/01)DX7000EM (External Modem)CONNECT THE EXTERNAL MODEM TO THE DX70001. Connect the 25-pin end of the RS-232 cable (supplie

Pelco Manual C682M-E (11/01) 47LOAD THE DRIVER FOR THE MODEM1. From the DISPLAY mode of the DX7000, click the EXIT button. A dialog box appears.Select

48 Pelco Manual C682M-E (11/01)5. Select Search for the Best Driver for Your Device. Click Next, the following appears:6. Type C:\Windows\System in th

Pelco Manual C682M-E (11/01) 498. Click Finish, the DX7000’s DISPLAY mode appears.9. From the DISPLAY mode of the DX7000 click the SETUP button. The S

Pelco Manual C682M-E (11/01) 5IMPORTANT SAFEGUARDS AND WARNINGSPrior to installation and use of this product, the following WARNINGS should be observe

50 Pelco Manual C682M-E (11/01)SPECIFICATIONSELECTRICAL/VIDEOInput Voltage: 100-240 VAC switchable, 50/60 HzSignal System: NTSC/PALCPU & RAMDX7008

Pelco Manual C682M-E (11/01) 51NOTES

® Pelco, the Pelco logo, Spectra, Genex, and Legacy are registered trademarks of Pelco. © Copyright 2001, Pelco™ Esprit and Camclosure are trademarks

6 Pelco Manual C682M-E (11/01)DESCRIPTIONThe DX7000 Series are high-quality digital video recorders (DVR) that combine the functionsof a recorder and

Pelco Manual C682M-E (11/01) 7INSTALLATIONPlace the DVR on any flat surface (desk or table) or install in any standard 19-inch (48.26 cm)wide console

8 Pelco Manual C682M-E (11/01)TWO-WIRE CONTROL SYSTEM INSTALLATION1. Connect the control wires from the receiver to the RS-422 converter. The DX7000 c

Pelco Manual C682M-E (11/01) 9PROGRAMMINGTurn the system power ON; the Main Screen (DISPLAY mode) appears.Figure 5. Display ModeDISPLAY MODE1 Date and