Pelco ES31PC Manual do Utilizador

ES30PC/ES31PC Esprit®with Pressurized IOCC311M-L (1/05)®INSTALLATION/OPERATIONU.S. Patent D-472.260

10 C311M-L (1/05)TXB SERIES TRANSLATOR BOARD INSTALLATION (OPTIONAL)Pelco’s TXB Series allows controllers from other companies to communicate with the

C311M-L (1/05) 11HOW TO REINSTALL THE PAN AND TILT COVERThe pan and tilt covers must be properly seated and have a tight seal all the way around when

12 C311M-L (1/05)OPERATIONPOWER-UP DISPLAYWhen the system is powered up, the selected protocol, revision number, and other information is displayed on

C311M-L (1/05) 13PRESSURIZED INTEGRATED OPTICS CARTRIDGEThe pressurized IOC houses an auto focus camera, lens, heater, and sensors in a self-contained

14 C311M-L (1/05)CURRENT READING MENUThe Current Reading menu displays the existing status of temperature, pressure, and dewpoint inside the integrate

C311M-L (1/05) 15ZONESA zone is a programmed pan area with set boundaries and identifying label. The Esprit system has a maximum of eight zones, each

16 C311M-L (1/05)PROGRAMMING – ES30PC16/ES31PC16Backlight comp OffZoom limit x- -Reset camera<Gain/AGC><Auto iris>NextExitCamera MenuLin

C311M-L (1/05) 17PROGRAMMING – ES30PC22/ES31PC22Gain Limit 7ExitGain/AGC MenuAuto-iris mode AutoAuto-iris level 66Auto-iris peak 16ExitAuto Iris M

18 C311M-L (1/05)PROGRAMMING – ES30PCBW18/ES31PCBW18Gain Limit 28ExitGain/AGC MenuAuto-iris mode AutoAuto-iris level 91Auto-iris peak 16ExitAuto I

C311M-L (1/05) 19PROGRAMMINGACCESSING MAIN MENU (PRESET 95)You can call up the main menu on your monitor by programming (setting or creating) preset 9

2 C311M-L (1/05)CONTENTSSection PageIMPORTANT SAFETY INSTRUCTIONS ...

20 C311M-L (1/05)ACK ACT (ACKNOWLEDGE ACTION)If an enivornmental condition inside of the IOC goes outside of the factory set limits (such as “Low Pres

C311M-L (1/05) 21ALERT DISPLAY POSITIONScreen positioning of the alert label is user-defined. Positioning options include the following:To set the ale

22 C311M-L (1/05)ALERT REPEATYou can program how often an ALERT label is repeatedly displayed until it is acknowledged by the system controller. The f

C311M-L (1/05) 23<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

24 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

C311M-L (1/05) 25<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

26 C311M-L (1/05)AUTO SHARPNESS<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMA

C311M-L (1/05) 27<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

28 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 29<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 3GAIN/AGC ...

30 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

C311M-L (1/05) 31<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

32 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 33<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

34 C311M-L (1/05)GAIN LIMITThe gain limit sets the maximum level for the automatic gain control. Increasing the level will increase the signal level a

C311M-L (1/05) 35<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

36 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENULimit S

C311M-L (1/05) 37LIMIT STOPS MENUThe manual pan limit stops can be set at the controller using the Limit Stops menu:1. Program preset 95 (28). The mai

38 C311M-L (1/05)Scan Limit StopsWhen scan limit stops are set, the pan and tilt reverses direction during random, frame, or auto scanning when a limi

C311M-L (1/05) 39<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENULine Sy

4 C311M-L (1/05)

40 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

C311M-L (1/05) 41<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

42 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 43<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUPower U

44 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 45Default Setting<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitM

46 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 47<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

48 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

C311M-L (1/05) 49<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 5IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5.

50 C311M-L (1/05)Auto white bal OnRed bal level 182Blue bal level 182ExitWhite Balance Menu<Camera><Line Sync><Power Up><Wiper>

C311M-L (1/05) 51<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUWiper M

52 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

C311M-L (1/05) 53<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

54 C311M-L (1/05)<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUBacklig

C311M-L (1/05) 55<Camera><Line Sync><Power Up><Wiper><Limit Stop><Alert><Other>ACK AlertExitMAIN MENUProport

56 C311M-L (1/05)TROUBLESHOOTINGNOTE: The system contains no user-serviceable parts. If there is a problem with your system, it must be returned to P

C311M-L (1/05) 57Symptom: No video or poor video1. Check the video and power connections to the camera.2. Check for power to the camera from the Espri

58 C311M-L (1/05)MAINTENANCEClean the enclosure window periodically with a mild non-abrasive detergent in water and a soft cloth to help maintain pict

C311M-L (1/05) 59008642. Open hinge door to the system. Remove the cap screw that secures the wiperboard. Unplug the ribbon cable connector.00866RIBBO

6 C311M-L (1/05)DESCRIPTIONThe ES30PC/ES31PC Esprit Series is designed to protect camera optics and electronics from moisture and airborne contaminant

60 C311M-L (1/05)APPENDIXNOTE: Esprit will sense and automatically select input from Coaxitron control signals in either the standard or extended mod

C311M-L (1/05) 61Table B. Switch Settings for SW2NOTE: The Esprit will sense and automatically select input from Coaxitron control signals in either

62 C311M-L (1/05)Table B. Switch Settings for SW2 (Continued)(Continued on next page)Receiver Address Switch SettingP-Type D-TypeControl Control SW2-

C311M-L (1/05) 63Table B. Switch Settings for SW2 (Continued)Receiver Address Switch SettingP-Type D-TypeControl Control SW2-1 SW2-2 SW2-3 SW2-4 SW2-

64 C311M-L (1/05)SPECIFICATIONSELECTRICALInput Voltage: 24, 120, or 230 VAC, 50/60 Hz; switch selectable for 120/230 VAC inputs. Reset feature enabled

C311M-L (1/05) 65SensitivityES30PC16/ES31PC16: 0.05 lux at 1/2-second shutter speed (NTSC)0.05 lux at 1/1.5-second shutter speed (PAL)ES30PC22/ES31PC2

66 C311M-K (9/04)

REVISION HISTORYManual # Date CommentsC311M 6/01 Original version.C311M-A 8/02 Camera modifications.C311M-B 9/02 Revised per ECO #02-8063.C311M-C 11/0

Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:

C311M-L (1/05) 7INSTALLATION When installing the ES30PC/ES31PC Esprit® system, allow for sufficient clearance between the top of the unit and overhea

8 C311M-L (1/05) Route the wires and cables through the center of the Esprit mount. Reinstallthe transformer module into the base. The transformer mo

C311M-L (1/05) 9 Turn on the power. If the red LED lights, turn off the power and proceed to the next step. If the red LED does not light, refer to t