Pelco DX8100 Manual do Utilizador

INSTALLATIONC2639M-B (8/09)DX8100 SeriesHybrid Video RecordersHard Disk Drive

10 C2639M-B (8/09)REMOVING A DRIVENOTE: When disconnecting the data and power cables, be sure to pull straight up on the connectors. Do not move the c

C2639M-B (8/09) 113. To remove a mounting basket:NOTE: It is recommended that you do not remove previously installed drives. If you must remove a driv

12 C2639M-B (8/09)INSTALLING A DRIVE1. Place the drive in the basket:a. Position the drive in the basket.b. Using a Phillips screwdriver, reinstall th

C2639M-B (8/09) 13Setting Up the System DrivePARTITIONING THE SYSTEM DRIVEThe system drive must be partitioned before you can install the system softw

14 C2639M-B (8/09)4. Go to the Boot menu, and then press the down arrow key to highlight the Boot Device Priority setting (refer to Figure 7).Figure 7

C2639M-B (8/09) 155. Press Enter. The Boot Device Priority screen appears. Figure 8. DX8100 Boot Device Priority View6. Press the plus sign (+) or min

16 C2639M-B (8/09)INSTALLING WINDOWS AND DX8100 APPLICATION SOFTWARE1. Insert the DX8100 Recovery disc in the DX8100 CD/DVD drive.2. Press Ctrl + Alt

C2639M-B (8/09) 177. The DX8100 Recovery dialog appears when the recovery process is complete (refer to Figure 10). Figure 10. DX8100 Recovery Dialog

18 C2639M-B (8/09)SETTING UP THE SYSTEM DATA PARTITIONNOTES: • Pelco recommends that you create a full backup of your disk contents before you make an

C2639M-B (8/09) 19b. Click Format. The Format E: dialog appears (refer to Figure 13).Figure 13. Format E Dialog Boxc. Verify that NTFS is displayed in

20 C2639M-B (8/09)OPTIONAL: CONFIGURING THE DATA DRIVE1. Right-click the unallocated drives pane. The shortcut menu appears (refer to Figure 15).Figur

C2639M-B (8/09) 213. Click Next. The “Completing the New Partition Wizard” appears.4. Click Finish. The drive is formatted (refer to Figure 17). Figur

22 C2639M-B (8/09)4. In the Open text box, type diskmgmt.msc, and then click OK. The “Initialize and Convert Disk Wizard” appears. The new data drive

C2639M-B (8/09) 236. Click Next. The “Select Disks to Convert” dialog appears (refer to Figure 21).Figure 21. Select Disks to Convert Dialog7. Click N

24 C2639M-B (8/09)PARTITIONING THE DATA DISK1. Right-click the unallocated disk pane. The shortcut menu appears (refer to Figure 24).Figure 24. Partit

C2639M-B (8/09) 25Reinstalling the DX81001. Replace the chassis cover using the screws you removed from the sides and rear of the unit (refer to Figur

26 C2639M-B (8/09)Allocating a DriveALLOCATING A SYSTEM AND DATA DRIVE SIMULTANEOUSLYThis section describes how to allocate a system drive’s data part

C2639M-B (8/09) 276. Repeat steps 4 and 5 to convert other data drives (refer to Figure 28). Figure 28. Configuring HDDs for Allocation7. Click “Begin

28 C2639M-B (8/09)ALLOCATING A NEW VIDEO DATA DRIVEPerform the procedure in this section if you installed a video data drive.1. Go to Start and select

C2639M-B (8/09) 295. For each drive listed (refer to Figure 32):a. Click the “Not used” button. The drop-down menu appears. b. Click Allocation.Figure

C2639M-B (8/09) 3ContentsImportant Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30 C2639M-B (8/09)REVISION HISTORYManual # Date CommentsC2639M 3/07 Original version.C2639M-A 12/07 Adds the disk partition procedure and replaces t

PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material or workmansh

Pelco, Inc. Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USAUSA & Canada Tel (800) 289-9100 Fax (800) 289-9150Internatio

4 C2639M-B (8/09)List of Illustrations1 Removing Chassis Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C2639M-B (8/09) 5Important Safety InstructionsThe system and data hard disk drives (HDD) for the DX8100 Series are installed inside the DX8100 chassis

6 C2639M-B (8/09)DescriptionThis manual describes how to replace, upgrade, or install a new hard disk drive (HDD) in the DX8100 Series hybrid/digital

C2639M-B (8/09) 7Installing a Hard Disk DriveNOTES:• The security surveillance service provided by the DX8100 is interrupted when the unit is taken of

8 C2639M-B (8/09)OPENING THE CHASSIS1. Make sure you protect the unit and its components, which are susceptible to damage from improper handling and E

C2639M-B (8/09) 9INTERIOR COMPONENT LAYOUT Refer to Figure 2 for information about the DX8100 layout of major components. (Slots on the motherboard ar