Pelco CAMCLOSURE INTEGRATED CAMERA SYSTEM 310 Manual do Utilizador

INSTALLATIONC2496M-A (1/06)310 Series Camclosure®Integrated Camera System

10 C2496M-A (1/06) Adjustments (Color Camera Only) If you have a color camera, it is set up at the factory and normally requires no adjustments. Some

C2496M-A (1/06) 11 SWITCH SETTINGS FOR VARIFOCAL LENS The high resolution camera with varifocal lens and auto iris is configured at the factory for au

12 C2496M-A (1/06) SWITCH SETTINGS FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS Refer to the switch drawing. The switch is located next to the lens. Au

C2496M-A (1/06) 13 FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS To adjust the focus, it may be necessary to remove the heater board in

14 C2496M-A (1/06) Specifications General Pan/Tilt Adjustment Manual; 180° pan; 180° tiltConstruction Aluminum base and cover, steel camera mounting

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workma

Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:

C2496M-A (1/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 C2496M-A (1/06) Important Safety Instructions 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions

C2496M-A (1/06) 5 REGULATORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) th

6 C2496M-A (1/06) Description The 310 Series Camclosure ® integrated camera system is a track-light design that mounts to a wall or ceiling. The sys

C2496M-A (1/06) 7 • Mounting to ICS310-COND conduit adapter (not supplied) • Mounting to a two-gang electrical boxCONDUIT ADAPTERWALL ORCEILINGTWO-GA

8 C2496M-A (1/06) CONNECT VIDEO AND POWER 1. Some indoor installations do not require a heater. If the installation does not require a heater, discon

C2496M-A (1/06) 9 ATTACH BASE Release the base locking ring for access to the mounting holes. To attach the base to an adapter plate or conduit adapt