Pelco Extended Platform Network Camera IXE Manual do Utilizador

INSTALLATION/OPERATIONC2953M-A (5/09)Sarix™ TechnologyIXE SeriesExtended PlatformNetwork Camera

10 C2953M-A (5/09)PRODUCT LABELThe product label lists the model number, date code, serial number, and Media Access Control (MAC) address. This infor

C2953M-A (5/09) 11Installation1. Remove all of the contents from the shipping box.2. Install the lens:NOTE: Megapixel lenses are designed and tested

12 C2953M-A (5/09)Figure 5. Ferrite Installation6. Connect the necessary wiring for alarms and relays (refer to Wiring on page 14).7. Apply power to

C2953M-A (5/09) 13SERVICE CABLEThe camera includes a service connector that outputs camera video. Use it at the installation site to set up the field

14 C2953M-A (5/09)WIRINGCAT5 CABLE Connect a Cat5 cable to the RJ-45 network connector. The 8-pin connector includes video and PoE for the camera. Po

C2953M-A (5/09) 15Connecting a Relay DeviceThe camera has an output for activating an external device. It supports both momentary and continuous rela

16 C2953M-A (5/09)Unsupervised AlarmsWhen an alarm is configured as an unsupervised alarm, the camera only activates an alarm when the normal alarm s

C2953M-A (5/09) 17OperationInstallation must be complete before you can begin operating the camera (refer to Installation on page 11). The camera com

18 C2953M-A (5/09)Live Video PageThe live video page allows you to manage the way you view live video and capture images. You can also view live vide

C2953M-A (5/09) 19SELECT A STREAM1. Click the Select Stream button.2. Select one of the following stream options:Primary Stream: To select this strea

20 C2953M-A (5/09)MAXIMIZE THE VIEWING AREA 1. Click the Maximize Viewing Area button. The live video pane expands to the full size of the page.2. Cl

C2953M-A (5/09) 21Settings PageDepending on user permissions, the Settings page allows you to manage camera system settings, set up users and groups,

22 C2953M-A (5/09)SYSTEM TABUse the System tab to view the device’s current firmware version, change the device name, enable/disable the power LED, a

C2953M-A (5/09) 23TIME SETTINGSSelect the time server and time zone for the camera, and turn on or off the overlay. Time Server: The external server

24 C2953M-A (5/09)NETWORK TABUse the Network tab to manage general settings, configure Secure Socket Layers (SSL), and enable SSH (Secure Shell).GENE

C2953M-A (5/09) 25DHCP OffTurning off DHCP allows you to manually set the camera’s IP address.To turn off DHCP:1. Select the Off option for DHCP.2. C

26 C2953M-A (5/09)Generate Certificate Request1. Click the Install Certificate button located at the bottom of the SSL Configuration page. The Select

C2953M-A (5/09) 27SSHSSH (Secure Shell) is a user-enabled protocol that allows Pelco Product Support to log on to and service the camera for advanced

28 C2953M-A (5/09)IMAGING TABUse the Imaging tab to change the camera orientation or to adjust digital processing, exposure, focus, tone map, and whi

C2953M-A (5/09) 29Digital ProcessingThe digital processing settings adjust the camera’s sharpness, saturation, and contrast. Digital processing can b

C2953M-A (5/09) 3ContentsRegulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30 C2953M-A (5/09)EXPOSUREExposure is the amount of light detected by the camera sensor. A scene with correct exposure settings has adequate detail a

C2953M-A (5/09) 31Auto ExposureAuto exposure automatically sets the amount of light detected by the camera sensor based on settings for light control

32 C2953M-A (5/09)Manual ExposureManual exposure sets the amount of light detected by the camera sensor based on a user-defined setting. Manual expos

C2953M-A (5/09) 33DAY NIGHTDay Night controls the position of the IR cut filter, which determines the color or black-white setting of the camera. The

34 C2953M-A (5/09)FOCUSUse the Focus page to select either Auto back focus or Manual back focus, adjust the available settings, or reset the back foc

C2953M-A (5/09) 35Manual FocusManual focus turns off the auto focus mechanism and locks the camera at a user-specified position. The camera will not

36 C2953M-A (5/09)TONE MAPTone map balances the brightest and darkest sections of an image to produce a picture with more balanced lighting and more

C2953M-A (5/09) 37WHITE BALANCEWhite balance settings define how the camera processes video images to render true colors in a scene. White balance is

38 C2953M-A (5/09)Manual White BalanceWhile the Auto mode will cover most scenes, the camera cannot account for every possible scene. In some install

C2953M-A (5/09) 39VIDEO STREAMS TABUse the Video Streams tab to select a preset camera configuration or to configure custom video stream settings.SEL

4 C2953M-A (5/09)Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40 C2953M-A (5/09)CUSTOM CONFIGURATIONThe camera features dual video streams with programmable settings for compression, resolution, image rate, and

C2953M-A (5/09) 41Compression StandardsJPEG: A commonly used compression scheme, also known as MJPEG. JPEG has the least impact on the camera's

42 C2953M-A (5/09)Rate ControlThe rate control setting determines the bit rate and quality of each frame in the video stream. There might be a trade-

C2953M-A (5/09) 43USERS AND GROUPS TABUse the Users and Groups tab to create and manage user accounts, group permissions, and to change the way the c

44 C2953M-A (5/09)8. Select the appropriate check boxes to choose the groups you wish to assign to the user. The Users tab includes default accounts

C2953M-A (5/09) 45Deleting a User1. Click the Users and Groups tab, and then select Users from the drop-down menu.2. Click the user profile that you

46 C2953M-A (5/09)GROUPSGroups can be created to assign permissions given to users within each group. Use the features on this page to create, modify

C2953M-A (5/09) 47Editing a GroupFigure 34. Edit Group PageTo edit a group:1. Click the Users and Groups tab, and then select Groups from the drop-do

48 C2953M-A (5/09)GENERAL SETTINGSThe user and groups general settings allow you to change the way the camera manages the users and groups settings.

C2953M-A (5/09) 49EVENTS TABUse the Events tab to program sources and handlers to manage camera events.SOURCESAn event is a preprogrammed camera func

C2953M-A (5/09) 5List of Illustrations1 Camera Connections and Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50 C2953M-A (5/09)Creating a Timer Event Source1. Click the Events tab, and then select Sources from the drop-down menu.2. Click in the Name box and

C2953M-A (5/09) 51HANDLERSEvent handlers are the actions that the camera takes when an event occurs. The camera supports four event handlers.Send Ema

52 C2953M-A (5/09)8. If you do not want the handler activated every time an event occurs, set filters for the handler (refer to Example Handler Filte

C2953M-A (5/09) 53Creating an Open/Close Relay Event Handler1. Click the Events tab, and then select Handlers from the drop-down menu.2. Click in the

54 C2953M-A (5/09)Help MenuOnline Help documents the basic instructions for configuring the camera. Click the Help hyperlink in the navigation bar to

C2953M-A (5/09) 55SpecificationsGeneralImaging Device 1/3-inch (effective)Imager Type CMOSImager Readout Progressive scanMaximum Resolution 1920 x 10

56 C2953M-A (5/09)Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QOS, HTTP, HTTPS, LDAP (

C2953M-A (5/09) 57

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.This equipment con

6 C2953M-A (5/09)Regulatory NoticesThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

Pelco, Inc. Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USAUSA & Canada Tel (800) 289-9100 Fax (800) 289-9150Internatio

C2953M-A (5/09) 7Video Quality CautionFrame Rate Notice Regarding User-Selected OptionsPelco systems are capable of providing high quality video for

8 C2953M-A (5/09)DescriptionThe IXE Series is an extended platform network based camera with a built-in, Web-based viewer for live streaming to a sta

C2953M-A (5/09) 9PARTS LISTInstallation tools and the following parts are needed but not supplied:CAMERA LAYOUTFigure 1. Camera Connections and Featu