Pelco PELCO C2230M Manual do Utilizador Página 1

C2230M (2/07)INSTALLATIONPMCP-WMT MonitorWall Mount

10 C2230M (2/07)SpecificationsGENERALTilt Angle 0° to 20°Maximum Load 220.5 lb (100 kg)Construction SteelFinish Black powder coatingDimensions Refer t

PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proved defective in material orworkmanshi

Worldwide Headquarters3500 Pelco WayClovis, California 93612 USAUSA & CanadaTel: 800/289-9100Fax: 800/289-9150InternationalTel: 1-559/292-1981Fax:

2 C2230M (2/07)ContentsImportant Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C2230M (2/07) 3List of Illustrations1 Tilt Wall Mount Bracket Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 C2230M (2/07)Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. C

C2230M (2/07) 5DescriptionUse the PMCP-WMT mounting bracket for attaching Pelco’s PMCP642 and PMCP650 plasma monitors to walls. PMCP-WMT can be tilted

6 C2230M (2/07)InstallationASSEMBLING THE WALL MOUNT BRACKET1. The wall mount bracket comes disassembled. Install the four short screws (included) and

C2230M (2/07) 72. Use the included six bolts, washers, and nuts to assemble the tilting mechanism. (Refer to Figure 2.)a. Install a bolt, washer, and

8 C2230M (2/07)SECURING THE MONITOR1. Refer to Figure 2. Make sure the mounting bracket angle is set to zero.2. Attach the mounting bracket to the wal

C2230M (2/07) 96. Refer to Figure 4. Lift the monitor and align the pegs of the four hangers with the grooves of the mounting bracket, then pull down